Rapid Building Systems

Rapid Plasters · Premium plasters & compounds

Plaster solutions for every market that sets.

From plasterboard lines to finishing trowels, floor screeds to industrial moulds — Rapidflow premium plasters and compounds are calcined at the industry's lowest temperature and finish among its highest strengths. One quality standard, tuned segment by segment.

Australian made, on demand, to the highest standard — our own range, and development & reliable supply for established brands building products of their own.

Rapid Plasters is the materials business of Rapid Building Systems — a trading name of RFC Plaster Pty Ltd.

The Rapid Plasters retail range — RBS-branded smooth coat filler tub, cornice adhesive bag and plaster of Paris bag.
The Rapid Plasters range — cornice adhesive, fillers and casting plasters. Quality you trust, supply on demand.
140 °CLowest calcination temperature in the industry
5–14 minSetting window — quick, controllable
>200Compressive strength, kp/cm² — with flexural >65
>30 MPaRecorded from calcined FGD gypsum (Beijing & Hangzhou power)
75%Purity feed matches 95%-purity kettle plaster for strength

The short answer

What is a fluid-bed gypsum calciner?

A fluid-bed calciner converts gypsum to plaster in a suspended, fluidised bed rather than a kettle or rotary drum. Rapidflow calcines at 140 °C — the lowest temperature in the industry — with no pre-drying, up to 30% energy saving, no moving parts in the calcining zone, and 15–30 tonnes per hour of consistent, pure hemihydrate.

Market segments

Tuned for the line you run.

Plasterboard manufacturers

Stronger stucco, lighter board.

Dramatic reduction in mixer lump formation, elimination of alkalinity blistering, lighter board from higher-strength stucco, lower water demand — and the option of low-cost fillers without losing strength.

Wall & finishing plasters

Top-grade render, further per bag.

Independently tested to the top grade of China's building plaster standard; wall plasters mix at ratios of 1:3–4, cutting applied cost considerably.

Thin-coat compounds

Compounds that behave.

Consistent purity and setting behaviour make Rapidflow plaster the reliable base for skim coats, jointing and specialty compounds.

Floor screeds

Flow, set, walk.

Predictable setting from five minutes and high early strength suit self-levelling and screed systems that keep programmes moving.

Industrial grades

For moulds, casts and callings beyond walls.

High Brinell hardness (>220 kp/cm²) and controlled water ratios for ceramic, foundry and industrial applications.

Mining plaster

>32 MPa, blast-tested for VCD applications.

The specialist end of the range: sprayed solutions for mining & civil — the harshest environments, with the highest water resistance we make.

The mining page
A tradesman's hand finishing fresh plaster on a wall with a sanding float.
Finishing quality, in the hand of the trade — plasters tuned for flow, set and final surface.

Independent verification

“Pure hemihydrate of very high strength — bending strength 35% higher than rotary-calcined plaster.”
Shanghai Research Institute of Building & Material Sciences — findings on RBS-calcined FGD gypsum, in our words

The Institute's testing of Chinese FGD gypsum calcined in our Australian plant concluded that plasters from 90%-purity FGD would match natural crystal gypsum and reach the top grade of China's Construction Gypsum Standard. Strength, purity and setting data across the full comparison table are available to serious buyers.

Request the test data

How to buy it

By the bag, by the tonne — or by the plant.

Rapidflow plasters and compounds are supplied bagged and bulk from the RBS plant network. Board manufacturers and large consumers can go one step further: a Rapidflow Calciner of your own, from 15 to 30 tonnes per hour, turning your gypsum — natural or by-product — into your supply chain.

A 20 kg bag of RAPIDSEAL Mining Plaster — Quality you trust, supply on demand, Australian made and manufactured.
Bagged, bulk, or made on your own site — the same premium standard.
Australian Made and Owned certification logo.

Australian made & owned

Quality you trust. Supply on demand.

The only thing more consistent than the quality of our plaster is our team's commitment to keeping you supplied. Big orders or small, we're ready when you are.

No waiting for material to arrive from overseas — or from the other side of the country.

Questions producers ask

Fluid-bed plaster, plainly answered.

Versus kettle & rotary

How does it compare with kettle or rotary calcination?

Lower temperature (140 °C), no pre-drying stage, no moving parts in the calcining zone, and independently verified higher plaster quality — 35% higher bending strength than rotary-calcined plaster in Shanghai Research Institute testing.

Feed purity

Does it demand premium feedstock?

No. 75%-purity feed has matched 95%-purity kettle plaster for strength, and FGD gypsum from Beijing and Hangzhou power stations has calcined to over 30 MPa.

Segments

Which markets does the plaster serve?

Plasterboard stucco, wall and finishing plasters, thin-coat compounds, floor screeds, industrial grades — and the >32 MPa explosion-proof-approved mining grade.

Recognition

Is the technology recognised in the industry?

RBS is a Global Gypsum Award winner, with plaster quality verified independently by the Shanghai Research Institute of Building & Material Sciences.

Setting

Is the setting behaviour controllable?

Yes — a quick, controllable setting window from five to fourteen minutes, with consistent purity batch after batch for compound formulation.

Supply model

Buy plaster, or make it?

Both paths are open: product supply for market, or a Rapidflow plant of your own — sized 15–30 tph — running on your feedstock at your site.

Tell us what your line needs the plaster to do.

Setting window, strength, board weight, water demand — name the numbers and we will meet them, or tell you honestly if we cannot.

Start a supply conversation